Inkbird ITC-308S 1100W Pre-Wired Digital Dual Stage Temperature Controller, Outlet Thermostats with 12″ Stainless Probe Sensor

Main features include plug and play design, easy to use, dual relay output, be able to connect with refrigeration and heating equipment at the same time, support reading with Centigrade or Fahrenheit unit, maximum output load: 1100W(110V), dual display window, be able to display measured temperature and set temperature at the same time, temperature calibration, compressor delay protection for refrigeration control, high and low temperature alarms are available, over-temperature and sensor fault alarm, heating/cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Specification: Temperature control range : -50 - 99 degree C / -58 - 210 degree F, temperature resolution: 0.1 degree C / 0.1 degree F, temperature accuracy: ±1 degree C (-50 to 70 degree C) / ±1 degrees F (-50 to 160 degrees F), temperature control mode : On/Off control, heating and cooling, input power: 100 to 240VAC, 50Hz/60Hz, temperature control output: Maximum 10A, 100V to 240V AC, buzzer alarm: High and low temperature alarm, Sensor type: NTC sensor (including), sensor length: 2m / 6.56 feet, dimension body: 140 x 68 x 33 mm (5.5" x 2.7" x 1.3"). Socket: 85 mm x 42 mm x 24 mm (3.3" x 1.7" x 1"), ambient temperature: -30 to 75 degree C / -22 to 167 degrees F, storage temperature: -20 - 60 degree C / -4 to 140 degrees F, humidity 20 - 85% (no condensate).

• Probe dimensions: 6 mm x 300 mm (0.24" x 12"), stainless steel material
• Dual relay output, be able to connect with refrigeration and heating equipment at the same time
• F/C degree display, easy to set, PV and SV dual display windows
• Maximum output load: 1100W(120V), alarm when over-temperature and sensor error
• Dual display window, be able to display measured temperature and set temperature at the same time