150w/300w/500w In-Line External Heater AQUARIUM HEATER – 150/300/500 WATT 1/2″-5/8″ (150 Watt 5/8″ (16/22mm) Hose)


Get The Best Deal
$55.83 
$55.83 as at 01:39 UTC. (Details)
$55.85
 
BUY FROM AMAZON

Features:1. Thermal spraying glass, speed up the heating process, higher efficiency. 2. External design, easy to install and doesn't occupy space in the tank.3. Two sensors to exam the temperatures of water inlet and outlet.4. Auto power off safety system when - Temperature is over 36℃.- Temperature is 3℃ more than setting temperature. - Difference between two sensors is over 5℃. How to use:1. Connect the water inlet at the downside of the heater and water outlet at the topside of the heater. 2. Press the button to set the temperature. 3. Please unplug the heater before put your hand inside the tank.4. External heater is only for indoor use and only use outside the tank. 5. Warranty only applies to the heater, not to the animals, plants or equipments of the tank. Accuracy ±1°C / Temperature range 20~35°C

  • The ISTA in-line external heater is designed for vertical use in most aquarium applications involving water hose of the specified diameter.
  • The ISTA External Heater must be used in a vertical manner for correct operation. The most common application is for use with canister filter, however the ISTA External Heater is easily adapted for use in almost any situation where heated aquarium water is required, such as with wet/dry sump pumps.
  • The ISTA External Heater is easily installed by cutting the tubing and connecting the two parts of the tube to each side of the ISTA External Heater.For reduced maintenance, it is recommended that the ISTA External Heater be installed within the filter`s output assembly. As most canister filters are not designed to bear weight, it is recommended that the ISTA External Heater be properly supported by the use of the attached loop to avoid stress on the output assembly.
  • The ISTA External Heater is completely safe and UL Listed.
  • There is no danger of damage if the ISTA External Heater is left running dry for short periods as the ISTA External Heater will switch itself off in that event. The ISTA External Heater heats with high efficiency by means of an internal heat pump system that avoids temperature variations. For use in freshwater and marine aquariums. Fits most canister filters.